• HOME > NEWS > how to tie a loopy bow without wired ribbon

how to tie a loopy bow without wired ribbon

For a knot that’s packed with style, loopy bows are the way to go. Don’t let the idea of wired ribbon throw you off – it is possible to craft this special type of bow without it. In this guide, you’ll find out how to effortlessly take your gift-wrapping game up a notch by making a bow with no wired ribbon required!

Starting your bow-making journey requires some preparations; equip yourself with a pair of scissors, ribbon, and a ruler – and you’ll be all set to easily assemble the perfect bow.

First, you’ll need to determine how much ribbon you’ll need; this amount should be double the width of the ribbon you’re using. For example, if it’s 1-inch wide, you’ll need to measure 2 inches. Having calculated the length of ribbon, go ahead and snip it off.

For a neat and professional look, fold the ribbon in half, grasp the ends firmly, and twist them together tightly to create the loop. This should provide an attractive and well-made appearance.

The loop is complete – it’s now time to craft the first bow loop. Smaller than the first, ensure it’s symmetrical – in order to do so, the size of the original loop may need to be adjusted.

After forming the two hoops with the ribbon, guide the dangling end into the first encircled hoop. Draw it firmly and tautly to ensure a firm hold. Then, double check to make sure that both the looped figures are identical in size.

Crafting the tails on your loops is the next step. Cut two strips of ribbon that match the length of the loop. Start by folding each strip in half, and then thread one through each loop. Pull the tails firmly but evenly, and fasten them together with a knot.

The bow must have an airy, full look. To achieve this, delicately spread the loops out and give the tails a bit of a fluffing; this should make the bow look balanced and round.

With only some effort and simplicity, you can make a bow with loops instead of using wired ribbon. This one-of-a-kind bow will make a lasting mark as an added accent on gifts or decoration. In just several straightforward steps, you can achieve this hushed appearance.

With a bit of patience and a few crucial steps, you can easily learn to crafts a stunningly chic non-wired loopy bow. Constructing this intricate bow will take some time and effort, but with some determined practice, it’ll become second nature.

To create a neat loopy bow without wired ribbon, the right kind of ribbon needs to be chosen. Wires can make it tough to bend the ribbon into shape and it’s best to opt for something without them. Ribbon of medium to heavy weight is perfect as it will secure the bow and make it last. Satin and grosgrain are two fabrics that work well for tying a loopy bow in this way.

To make a voluminous and loopy bow, begin by taking a piece of ribbon that’s four times as long as the desired finished product. For instance, if you’re aiming for a bow measuring three inches wide, opt for a 12-inch ribbon.

Once you have trimmed your ribbon to the length of your choice, you can form a loop at one side of it. Start by folding your ribbon in two, then go ahead and spin it in the middle once or twice. Once you’re done, take the two sides of the ribbon and place them one on top of the other. Now the loop is all set – all you’ll need to do is tie the ends of the piece together with a square knot to make it firm.

Now it’s time to construct the second loop in the loopy bow. Take both ends of the ribbon, intertwine them, and shape them into a loop that matches the size of the previous one. Secure the loop with a square knot, ensuring that the two ends of the ribbon stay firmly tied together.

To conclude the procedure of creating a bow without wired ribbon, you must form the “tail.” Start by taking both extremities of the ribbon and twisting them together. Subsequently, crisscross the two ends, which will yield a knot bigger than the other two earlier-crafted loops. Stabilize this loop by connecting each side of the ribbon with a square knot.

Your loopy bow is nearly complete! Gather the previous three loops together by taking the ribbon’s two extremities and crossing them over one another. Generating a larger loop than the former trio, secure the bow in place with a square knot, firmly tying the ribbon’s tips together.

With your knotting securely in place, you can now accentuate it with fluffs and finesse it with adjustments to the bows as you please. Congratulations, your loopy bow is ready to be utilized for garnishing gifts, adding flair to parcels, and sprucing up anything else your creative imagination can think of!

Crafting a stunning loopy bow without wired ribbon can feel intimidating to start with, however, with some practice and a few basic steps, everyone can achieve an exquisite result. Before long, you’ll be an expert at creating special loopy bows that will make a statement for each event!

Related Product

  • Galvanized Wire

    Galvanized Wire

    Product information:   Product Name Galvanized Wire Package 5kgs/roll, pp film inside and hassian cloth outside or pp woven bag outside 25kgs/roll, pp film inside and hassian […]

  • U Type Wire

    U Type Wire

    Product information: Product Name Scaffolding Packing Galvanized Tie Wire Cuttings U Type Binding Wire Material Electro galvanized,hot dipped galvanized,black annealed,PVC coated W […]

  • Black Annealed Wire

    Black Annealed Wire

    Product Description: Product name Black Annealed Wire MOQ: No Material Q195,Q235 Delivery time: 20days after payment Surface annealed   or as your request Payment terms: T/T,L/C We […]

  • Double Loop Tie Wire

    Double Loop Tie Wire

    Double loop tie wire material Product Information: Wire diam. 0.5mm—2.0mm Finishes Black Annealed. Galvanized Annealed, Coppered, PVC coated, Stainless steel Wire gauge BWG6 […]

  • Cutting Wire

    Cutting Wire

    Product Description:   Product Name Cutting Wire Zinc Coating 30-70g Place of Origin Chinese mainland Tensile Strength 33-50kg/mm2 Material Electro galvanizedHot dipped galvan […]

  • Tie Wire

    Tie Wire

    Production Process of rebar tie wire : Steel rod coil — Wire Drawing — Wire Annealing–Rust Removing–Acid Washing– Boiling– Drying– Zinc Feeding– Wire Coiling. Wires Type 1.Galvaniz […]

  • Garden Wire

    Garden Wire

    Product information: The garden shingling is made of pvc plastic and high-quality galvanized iron wire, which is 3 to 4 times faster than any material, and the buckle is loose, the […]

  • PVC Coated Wire

    PVC Coated Wire

    PVC coated  wire, also called plastic coated wire, after high temperature dissolution cooled solid PVC particles uniformly wrapped in high-quality black iron wire and galvanized wi […]

  • Twister Tool

    Twister Tool

    Handle Twister tool,plastic handle: Weight: 0.4kg Color: Black, blue,yellow ,red etc Material: Carbon Steel   Plastic Handle Wire Tie / Tying Hook Tool Twister   Wooden Handle […]


  • Post time: 2023-07-21
    error: Content is protected !!