• HOME > NEWS > how to tie a wire trace for pike fishing

how to tie a wire trace for pike fishing

When fishing for pike, a wire trace is a must – it is the buffer that helps safeguard the main line against being severed. A wire trace is essentially a length of metal wire that is affixed to the mainline. Its sturdiness is what creates an obstacle to stop pike from biting through the line. Crafting your own wire trace requires understanding different kinds of wire and tying techniques. This article will look into the different options of wire for pike wire tracings, along with ways to tie the line correctly. Most importantly, we’ll expound on why using a wire trace is so important when pike fishing.

Different Kinds of Wires

Whether you’re a veteran angler or have just stepped foot on a fishing boat, selecting the proper wire for a pike trace is quite the undertaking. The size and strength of the wire must be taken into account, as this depends on what type and size of pike you are aiming to catch. If you’re expecting to haul in smaller prey, thinnest gauge wires will do just fine; however, a thicker gauge should be chosen for the bigger fish. Not to be overlooked either is the strength of the wire which must be powerful enough to withstand larger pike. Stainless steel wire is always a safe bet as it is rust-resistant and dependably stiff.

Ways of Lacing

When pike angling, you need to know how to securely attach a wire trace to the main line. To do this, there is the easy-to-tie simple loop knot. It achieves a reliable connection and allows you to fasten a leader line if desired. For additional strength, another option is the Albright knot. While harder to tie, it provides a strong connection between the trace wire and main line, and it is also suitable for connecting a leader line.

The Value of Utilizing a Wire Trace

For a successful pike fishing experience, having a wire trace on your line is a must. Doing so acts as a barrier to stop the notoriously sharp-toothed predator from cutting through your line. Not only will the line remain secure, but you will be that much closer to ensuring that the pike does not make off with the bait without getting hooked!

Fishing for pike can be tricky and requires the strategic use of a wire trace. When considering which type of wire to use, stainless steel is a good option to look into. Additionally, you have to be familiar with several methods for tying a wire trace, for instance the simple loop knot and Albright knot. Oftentimes, this is the only thing that keeps the pike from stealing the bait and breaking the line without being caught.

Any keen pike fisherman knows the importance of investing in wire traces. This handy tool is a short length of wire used to secure lures or bait to your line or leader, protecting the line from snags that would be caused by the sharp teeth of pike. With this safeguard in place, you’re free to reeled in more catches without needing to replace your rod’s line time and time again.

Crafting the perfect wire trace for pike fishing isn’t a challenge; it just involves a handful of specific steps. To make it drive home the desired result, here is a guide on how to tie it up like a pro.

If you’re hoping to successfully trace for pike, selecting the correct wire becomes key. The ideal option? Stainless steel or titanium – materials strong enough to stand up against the pike’s teeth, yet still quite versatile. When it comes to diameter, 0.45mm to 0.60mm is usually sufficient for a successful catch.

To ensure the appropriate level of tension, measure out a piece of wire that is just over half a foot in length – this length is ideal for smaller lures. However, if your chosen bait requires more space to move around, you must opt for a slightly longer length of wire for proper tension.

With your fishing wire cut, it’s time to start attaching the trace. Begin by making a large loop at one end, sizable enough for your bait or lure. Next, twist the loop multiple times around the primary section of wire. This will construct a dependable knot to keep your bait or lure in place.

At the end of the line, secure the thread by firmly wrapping it around the length of wire. This will ensure that the connection remains tight throughout your fishing excursion.

In order to secure the wire trace to your line or leader, take one end of the wire and loop it through the eye. Once you’ve pulled it taut, wind the end of the trace a few times around the main length. Doing this will provide a solid connection between them.

Taking steps to create a sure bond, snip away any superfluous wire, being mindful of avoiding an overabundance that might encumber when you’re doing your fishing. Ensure that there is just enough of the wire left to create a secure connection.

Congratulations! With a little practice, you’ll now be ready to hit the lakes and take on pike fishing with a neatly-tied wire trace. In no time, you’ll be able to quickly and with ease construct your own wire traces to catch more fish.

Related Product

  • Reel Wire Tool

    Reel Wire Tool

    Product information: Specification of Aluminum Tie Wire Reel Material Plastic & Aluminum Weight 1.95LBS Application Binding Wire MOQ 1000pcs Sample Free Package 5PCS/CARTON &nb […]

  • PVC Coated Wire

    PVC Coated Wire

    PVC coated  wire, also called plastic coated wire, after high temperature dissolution cooled solid PVC particles uniformly wrapped in high-quality black iron wire and galvanized wi […]

  • Double Loop Tie Wire

    Double Loop Tie Wire

    Double loop tie wire material Product Information: Wire diam. 0.5mm—2.0mm Finishes Black Annealed. Galvanized Annealed, Coppered, PVC coated, Stainless steel Wire gauge BWG6 […]

  • Garden Wire

    Garden Wire

    Product information: The garden shingling is made of pvc plastic and high-quality galvanized iron wire, which is 3 to 4 times faster than any material, and the buckle is loose, the […]

  • Twister Tool

    Twister Tool

    Handle Twister tool,plastic handle: Weight: 0.4kg Color: Black, blue,yellow ,red etc Material: Carbon Steel   Plastic Handle Wire Tie / Tying Hook Tool Twister   Wooden Handle […]

  • Black Annealed Wire

    Black Annealed Wire

    Product Description: Product name Black Annealed Wire MOQ: No Material Q195,Q235 Delivery time: 20days after payment Surface annealed   or as your request Payment terms: T/T,L/C We […]

  • Cutting Wire

    Cutting Wire

    Product Description:   Product Name Cutting Wire Zinc Coating 30-70g Place of Origin Chinese mainland Tensile Strength 33-50kg/mm2 Material Electro galvanizedHot dipped galvan […]

  • U Type Wire

    U Type Wire

    Product information: Product Name Scaffolding Packing Galvanized Tie Wire Cuttings U Type Binding Wire Material Electro galvanized,hot dipped galvanized,black annealed,PVC coated W […]

  • Galvanized Wire

    Galvanized Wire

    Product information:   Product Name Galvanized Wire Package 5kgs/roll, pp film inside and hassian cloth outside or pp woven bag outside 25kgs/roll, pp film inside and hassian […]


  • Post time: 2023-08-01
    error: Content is protected !!