Constructed of wood or metal, a snow fence, also known as a wind fence, stands sentry against the breezes to inhibit the carrying of snow in areas where it is not desired. This type of fence is set up in an exposed area to discourage the wind from transporting snow near roads or parking lots.
Snow fences made of wood have long been a mainstay of the American landscape. These barriers are secured to posts inserted into the ground, with slats of wood spaced evenly to allow the wind to pass through unhindered. Among snow fences, these wooden models are by far the most prominent.
As opposed to their more common wooden counterparts, metal snow fences are available. They require posts to be planted in the soil, to which metal sheets are attached with spacing between them that allows the wind to easily pass through.
To lock snow-slats or sheets of wood or metal onto the posts, tie wire is what workers use. This type of wire is flexible enough to wrap around the slats and easily twist in place, holding the structures firmly. Different sizes and gauges of tie-wire are available for different needs and specifications.
The kind of tie wire you’ll need to attach your slats or sheets together comes down to their size. If you’re making something with small panels, opt for a wire with a lightweight gauge. On the other hand, a thicker gauge is best for bigger projects with large slats and sheets.
If you need to get some tie wire for any job around the house, your local hardware store will most likely have you covered. Depending on the scope of the project, there are various roll lengths available for purchase.
When commencing work on your project, calculate the surface area of the area to be enclosed with the fence. Moreover, decide on the ideal height for your fence. After establishing measurements, you will be able to estimate the amount of tie wire necessary for your task at hand.
You’ll need a pair of wire cutters so you can trim the tie wire to the appropriate length. Leave sufficient length at either end so you can twist it to hold the fence in its desired spot.
Once the tie-wire has been cut to the appropriate size, it is time to intertwine it with the fences structure. Commencing at one end, wrap the wire around a specific slat or sheet and move onwards in the same fashion until you reach the fencing’s other end.
Once you are done looping the wire around the fence, it is time to keep the fence safe with a secure knot. Tie the ends of the wire to the posts and give it a tug – make certain the connection is strong! That way, you can relax knowing that your fence will remain sturdy.
Now that you’ve reached the end of your project, you can snip away the surplus wire from your fence. Utilize a pair of wire cutters to cut and then discard the superfluous fencing material responsibly.
The installation of a snow fence is now complete, signifying a successful accomplishment.
Post time: 2023-07-01