Setting up a garage door opener that’s electric requires an electrical outlet nearby. Most openers come with a cord long enough to plug in, but if the opener is high on the ceiling, you may need an extension cord for proper connection. To ensure safety, always remember to switch off the power supply from the circuit breaker or fuse box before beginning with any wiring work.
To start the process of disassembling the garage door opener, begin by disconnecting it from the power source. Once this is done, you can take off the cover to expose the motor, chain, or belt that moves the door. Additionally, a set of conductive wires will be visible joining the motor to the circuit board.
In order to connect your garage door opener, you must first locate the three wires. The largest of the wires is the power wire, either black or red in colour. The switch wire will be smaller and will be a hue of either white or green. Lastly, the thinnest wire will be for the light, this one being available in either yellow or blue.
As soon as you spot the wires, you are all set to begin setting up the opener. To start, link the power wire to the slot labeled “PWR” on the opener’s circuit board. Follow that up by attaching the switch wire to the slot called “SW” on the board. Then, attach the light wire to the space denominated “LT” on the board.
After making sure all of the electrical wires are linked up, you can go ahead and secure the door opener’s lid back to its place. Take a few moments to power on the apparatus before then verifying its functionality – if it doesn’t seem to be running as intended, double-check that the connections were properly made.
Post time: 2023-06-23