gi tie wire length per kg

When shopping for Galvanized iron (GI) wire, you’ll find different gauges and lengths available. One of the most common sizes is 18 gauge, which comes in lengths between one and two meters. For each size, there is a different length per kilogram of the wire; here’s a look at the expected length per kilogram of GI wire across various gauges:

Measuring from one to five meters, the Gauge Length gradually decreases, starting at eighteen and ending at twelve. The first segment is from one to two meters, with the Gauge Length being sixteen meters; the second is from two to three meters, at fourteen; while the third interval goes from three to four, consequently coming in at twelve meters.

The amount of galvanized iron (GI) wire delivered per kilogram can differ significantly according to the manufacturer. To make sure you get the right amount for your project, it’s best to verify the exact quantity of GI wire per kg that the provider offers.

That sturdy material most familiar in construction and industrial contexts, otherwise known as GI wire, is not limited exclusively to those realms. In fact, it is used in agriculture, fencing, and beyond. Not only does it have the strength necessary to support reinforcement bars, mesh, and other components of concrete construction, but also excels in any situation that requires a dependable wire.

The durability of a kilogram of GI wire can be determined by the coating surrounding it. Most frequently, a protective layer of zinc is used to shield it from corrosion. However, alternative options, like aluminum and stainless steel, can be employed to further bolster its immunity to corrosion.

GI wire of varying sizes can be procured to complete projects; however, the two most popular diameters used are 2.5 mm and 4 mm. Anything larger than these dimensions is not commonly available for purchase.

The weight of GI wire plays an important role in its length per kg; the heavier the wire, the less length there is. For applications that do not demand a wire of ravenous strength, lightweight GI wire is usually preferred.

GI wire’s length-per-kilo can be attributed to its tensile strength, with higher tensile strength offering shorter amounts of wire. For requirements of maximum sturdiness, the peak-tensile-strength GI wire is often employed.

GI wire can measure differently depending on which type of end finish is attached. Applying a galvanized finish is standard as that provides the best safeguard against corrosion. If additional protection against rust is desired, an annealed finish can be employed instead.

Each kilogram of GI wire can vary in length based on the material it’s constructed from. High carbon steel is commonly used to create GI wire however, stainless steel can also be used to shape it.

The robustness of GI wire produced per kg can be determined by the process of manufacture employed. Cold drawing is the most general approach for fabrication and creates a top-notch resultant wire. Yet, hot rolling is another potential method to fabricate this type of wire.

A kg of GI wire can vary in length depending on its type of packaging. Bundled versions, for example, can be an alternative to a traditional coil option. The latter is often the more popular since it enables easier storage and transport.

GI wire is typically sold by the kilogram and the rate can vary depending on several defining factors. A typical range sits between fifty and one hundred cents per kilogram. These factors include the coating, length, diameter, weight, tensile strength, packing, material composition, type of end finish, and the manufacturing process employed.

Related Product